View IRS-A200ST01-R1_7484285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for reference only 1/20 ? u ?? ??? {? pyroelectric infrared sensor product specification date 23 oct., 2007 J approved by _J checked by prepared by m (scope) {??????g???? ??? ????????? ????Bj this product specification is applied to dual element type pyroelectric infrared sensor IRS-A200ST01-R1 used to detect infrared rays. please contact us when using this product fo r any other applications than described in the above. ? (murata part number) ???
for reference only 2/20 ? u Q (outline drawing and dimensions) ?? 3-1 outline dimensions 1 ?? figure 1. outline dimensions top view 3.8 5.7 6.5 4.3 gnd ??R power supply terminal (vin) 4.8 2.5 6.7 4-0.8 0.55 0.55 0.55 1.4 2.0 1.4 2.6 ????R out put terminal (vout) ???` ???` optical filter pyro-element g: : 0.2 unit: mm general tolerance: 0.2mm 0 1 x 0.8 bottom view
for reference only 3/20 ? u ? 3-2 equivalent circuit ? (numbering) ???`??? part number and monthly number are numbering on the side of package. ?u? 4-1 part number code and trade code u?????u???? ???? part number code: 01 trade code: u? 4-2 production month u???`???????? printed on the top of sensor in eiaj code. ? (month) (year) n p q r s t u v w x y z abcde f g j m n r tu abcdefghjk l m ??u??? 4-3 numbering example (october 2006) ??R (vin) `?R (vout) (gnd) 0 1
for reference only 4/20 ? u ?o? 2550%rh r?? ratings and characteristics (25 c, 50%rh) ?R 5-1 responsivity (rv) min. typ. ?R responsivity (rv) 3.2 mvpp 3.8 mvpp ?R?Jy????? responsivity is measured with following system. ? ?R?y figure 2. test syst em of responsivity ??Og? 5-2 balance of responsivity ??Og? balance 10% max. ?(%)(r-l)/(r+l) ?? r ??O? l ??O? balance(%) = |(rr-rl)/(rr+rl)| 100 rr : response from right element rl : response from left element \ black body 500k 140mm +5v 47kohm d s g ? infrared sensor ???????????(1hz) mechanical chopper (1hz) ?????????? (1hz) lock-in amp.(1hz) ???????? oscilloscope 22uf
for reference only 5/20 ? u ?? 5-3 white noise level ?? white noise 250mvpp max. y ??? ???y??? ?y ??y gy? ?yh `???????By? conditions for measurement ? test circuit : with t he circuit shown in figure3. ? measure point : across out and gnd. ? environment : in the electrically and optically shielded box kept at 25 c. ?? ? ??y figure 3. test circuit d g s 1n 47k 10k 10k 22u 2.2meg 10n 33k lm358 1n 10k 47u 22 u 33 k 22k 1n lm358 1meg 22n 33k 4.7k 100u 47u lm78l05 12vdc out gnd gain:76.5db (x6700) a
for reference only 6/20 ? u `?R 5-4 source voltage `?R(s) source voltage(vs) 0.2 to 2.5 v y ??? ?d??y??? ?y ??y agndg ?yh ?`????y? conditions for measurement ? test circuit : with t he circuit shown in figure3. ? measure point : across a and gnd. ? environment : in the electrically and optically shielded and temperature controlled box. ?rg 5-5 warm-up time ?rg warm-up time 30sec. max. y ??? ?d??y??? ?yh `???????By? ??`?R??_???rg?? conditions for measurement ? test circuit : with the circuit shown in figure3. ? environment : in the electrically and optically shielded box kept at 25 c. warm-up time is defined as time for source voltage to reach to specified value from turning on.
for reference only 7/20 ? u ??R 5-6 supply voltage range ?X`? 5-7 recommended rs value Q s Q `? s ??g? ?? resistance rs is inserted across terminal-s and gnd. ??? 5-8 field of view 4 ??? figure4. field of view
for reference only 8/20 ? u ???` 5-9 optical filter ?^ ??? | ? transmittance : the graph shown in figure5. material : monocrystalline silicon thickness : 0.55 0.10mm ? ??^ figure5. transmittance of opt ical filter (example)
for reference only 9/20 ? u ??? (operating temperature) - ?? (storage temperature) - ????` (recommended land pattern) ? ????` figure6. recommendable land pattern 4.74.75 1.201.25 0.600.85 please take gnd-pattern v-in g u ni t : mm
for reference only 10/20 ? u .?`? (soldering conditions) ??``???? ??`???? ??`???? ???????H?????_J?? ? following figure shows temperature profile when reflow soldering. ? cleaning after reflow sol dering should not be applied. ? flow soldering should not be applied. ? please contact us when using other refl ow profile except following reflow profile. ? ?`? figure7. soldering conditions u ?????? peak temperature on product surface 240 , 5sec. max. temp.( ) time(sec.) gradual in air ?? heating 220 min. 2/sec. max. N?rg h eating period 80-100 sec. (20sec.min.) 30-40 sec.max. 120 sec.min. 240 220 180 150 100 pre-h eating 150 -180
for reference only 11/20 ? u y?? (package and marking) ?1`1500{`?????? ??`???`????r?????? ?rohs????u???rohs??????? rohs-y???rohs???abc?????? ??????????? ?e?|??v ?????? ? the tape for pyroelectric infrared sensor s hall be clockwise. the feeding holes shall be to the right side as the tape is pulled toward the user. ? a reel shall contain 1,500 pcs of pyroelectric infrared sensor and its reel label shall be clearly marked with part number, quantity, and inspection number. ? the product which has rohs-y<*> mark on the packaging label is compliance with rohs directives. the alphabet in blank <*> will be changed a to b, b to c, and so on with every revision of the rohs direct ives. please refer to the document, "the marking for the directives on the restrict ion of the hazardous s ubstances' use," to check the directives corresponding to alphabets in <*> .
for reference only 12/20 ? u ` reel ?`` trailer u?? sensor contained 160-1140 ? 330 wide 21.5 unit mm 400-560 100-200 100mm min. ???`?` cover tape `` leader `? weld ?? empty emboss ? ??`? figure8. emboss tape 2.80.1 0.30.05 7max +0.1 6.90.1 1.5 -0.0 4.00.1 2.00.1 7.50.1 1.750.1 12.00.1 16.00.2 1.5 - 0.0 +0.1 7.10.1
for reference only 13/20 ? u ? ` figure9. reel size w1 : 17.41.0 w2 : 21.41.0
for reference only 14/20 ? u ? y figure10. packing d w l ` reel ????????? outer box (carton box) ?? label ?? label y?y packaging quantity & dimension of packaging y packing quantity dimension (mm) (pcs.) 1,500 (1 ` 1 reel) 3,000 (2 ` 2 reels) 4,500 (3 ` 3 reels) 6,000 (4 ` 4 reels) 7,500 5 ` 5 reels 350 350 120 y packing quantity 7,500 pcs. (=1,500 pcs. 5 ??? ) big carton box : 7,500 pcs. max. (=1,500 pcs. 5 reels) `???n ?? if there is space in the box, cushion is packed as shock absorber. y?y????o??? materials for packing and the packing amount might change the content without a previous notice.
for reference only 15/20 ? u m (reliability) ?????Yg???? 3rg ??y????? judgment criteria for 11-1 to 11-7. after eac h one of the test, the sensor is kept for three hours at room temperature, then it is evaluated with the following criteria. ? table1. judgment criteria ? items judgment criteria Q external appearance p? no significant damage ?R responsivity ??? 20%?? within 20% shift from initial value white noise ? +100mv ? within initial value +100mv `?R source voltage ????? within rated value ?Y 11-1 high temperature ?? 100??500rg?? 100 c for 500hours ?Y 11-2 low temperature ?? -40??500rg?? -40 c for 500hours ??Y 11-3 humidity ?? 60? 95%rh 500rg?? 60 c, 95%rh for 500hours
for reference only 16/20 ? u ??Y 11-4 heat cycle -25 30 ? 30 55 30 1?? 20R?? 20 times of the following cycle -25 c, 30min. ? room temp. 30min. ? 55 c, 30min. ? room temp. ?Y 11-5 vibration ? 1055hz ? 1.5mm? x,y,z 3? 60??? apply vibration of amp litude of 1.5mm with 10 to 55hz bands to each of 3 perpendicular directions (x, y, z) for an hour. n?Y 11-6 shock ?n?YC??100g??x,y,z 3 ??? (1g=9.8m/s ) apply shock of 100g sinewave by standar d shock tester to each 3 perpendicular directions (x, y, z). (1g=9.8m/s 2 ) ?? 11-7 soldering heat ??`?????`? ?? `???`??? 2 times of soldering test on figure7. the second is returned to room temper ature after the first soldering test.
for reference only 17/20 ? u ? (. caution) ?? 12-1 limitation of applications u?????`??b????? ????m????????? ???????u???????? ????? please avoid using this product for the applications listed below which require especially high reliability for the prevention of defects t hat might directly cause damage to the third party's life, body or property. when this product is used for the applicat ions listed below, we shall not be liable for any claims on the product. ??C C ??C ?kC ?C ??C???? ????C IC ??C??C 1. aircraft equipment 2. aerospace equipment 3. undersea equipment 4. power plant control equipment 5. medical equipment 6. transportation equipment (vehi cles, trains, ships, etc.) 7. traffic signal equipment 8. data-processing equipment 9. application of similar complexity an d/or reliability requirement to the applications listed in the above ?`?`?C? 12-2 fail-safe u???????? ???m ??`?`?C??? be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caus ed by the abnormal function or the failure of our product.
for reference only 18/20 ? u ??? ( caution in use ) O?r 13-1 notice in design ) ????m????`O? ?Y?????`?`????? ? in the case of outdoor use, suitable optical filter and water and humidity proof structure should be applied. ) ?????? to prevent failure or malfunction, please use a stabilized power supply. ) ???B?????`?? ?????_J?? please avoid using the sensor in the fo llowing conditions because it may cause failure or malfunction ; a) ??Cy?Ng???? ?L?? in such a fluid as water, al cohol etc. corrosive gas (s0 2 , cl 2 , no x etc.) or sea breeze. b) ??BA? in high humidity. c) ?????????????? in a place exposed directly to s unlight or headlight of automobile. d) ???? in a place exposed to rapid ambient temperature change. e) L?``?L???? in a place exposed directly to bl ow from air-conditioner or heater. f) ??? in a place exposed to strong vibration. g) ???? in a place exposed to str ong electromagnetic field. h) ????????????? ?? in such a place where infrared ray is shaded. i) ?ah????? in any other place similar to the above (a) through (h).
for reference only 19/20 ? u ???r 13-2 notice in handling and storage ) ?????A??? optical filter of sensor sh ould not be scratched or soiled. ) ??]???n??? strong shock should be avoided. ) ????????? electrostatics and strong electrom agnetic field s hould be avoided. ) ?????`????? ?B??? sensor should be kept on conductive sponge. ) ??m???Cy?g? ? ?? ? L???? high temperature, high humidity, fluid as wa ter or alcohol etc., corrosive gas ( s0 2 , cl 2 , no x etc.) and sea breeze should be avoided. g?r 13-3 notice in mounting ?????????A?? ?????A`???? please follow soldering conditions descri bed in the specificat ion. this product can permanently stop operating if the piezoelectric(pyroele ctric) characteristic is decreased due to excessive heating. u??????????B?????C??? ?{??d???????g?? cleaning after reflow soldering should not be applied. optical filter of sensor should not be soiled because it may cause failure or malfunction. ( note) ??H??u??g???B??u?_J?? please make sure that your product has been evaluated in view of your specifications with our produc t being mounted to your product. {??d????g?????? h???u???{??d??? ? you are requested not to use our product deviating from the agreed
for reference only 20/20 ? u specifications. ??gY????vs?? d??m????????{? ?\?????|^?I??? ?v??e?g????? ?d????Z???? ???e??s????? ? we consider it not to appropriate to include any terms and conditions with regard to the business transaction in t he product specificati ons, drawings or other technical documents. therefore, if your technical documents as above include such terms and conditions such as warranty clause, product liability clause, or intellectual property infringe ment liability clause, they will be deemed to be invalid.

▲Up To Search▲

Price & Availability of IRS-A200ST01-R1

	To Download IRS-A200ST01-R1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .